Clean Micro-Lab

Clean Micro-Lab

FEATURES

• The laboratory consists of three seperate work areas, each with its own segregated air supply and uni-directional work flow (300 sq ft total);

• SOPs and qualtiy documents designed for a quick start of developing your own customized procedures for analysis, quality control, maintenance and regulatory compliance;

• Laboratory partitions are constructed of high quality aluminum alloy hardware with steel support walls;

• Three individual working areas are supplied complete with built-in work surfaces, interior lighting, air filtration systems, sample handling airlocks and a fully plumbed ready sink;

• Completely pre- wired with electrical, telephone and computer network connections;

• The contamination control system is very sophisticated and well designed to minimize the possibility of sample contamination.

DEMOSTRATION OF REAL-TIME PCR APPLICAITON

Three segregated work areas are assigned with different tasks:

• Reagent preparation room-this is a no-copy environment in which reagents are   prepared prior to the input of target genes;

• Sample preparation room-samples are prepared for amplification and transferred by airlock to the Amplification room;

• Amplification room-the equipment required for amplification is housed in this high-copy area.

The air pressure in each room can be independently adjusted to prevent aerosol contamination. Double-door entry chambers allow users to change gowns and shoe covers upon entering or existing a critical work area.

CONTAMINATION CONTROL SYSTEM

• The laboratory is divided into three standard work areas air pressure is adjustable in each work area.

• UV lamps installed in the three work areas, three buffer area's ceiling, and tranfer windows.

• Secure electronic airlock for sample transfer: an electronic transfer window prevents contamination during sample transfer between work areas. The airlock system segregates sample/material flow from the personnel flow.

• Air exhaust pipe system: independently adjustable vents allow the control of air flow and exhaust in each of the three work areas. Positive air pressure can be maintained in each chamber independently to protect against particulate and aerosol contamination.

• Safe and airtight construction: the laboratory is based on a modular aluminum frame with steel washable support walls and glass windows, precisely sealed joints around walls and windows.

SPECIFICATION

• Gene Lab Size (L x W x H):  19.2 x 11.7 x 8.7 ft (5.85 x 3.55 x 2.65 m)

• Room I Size (L x W x H):      4.9 x 11.7 x 8.7 ft (1.5 x 3.55 x 2.65 m)

• Room II Size (L x W x H):     8.7 x 11.7 x 8.7 ft (2.65 x 3.55 x 2.65 m)

• Room III Size (L x W x H):    4.9 x 11.7 x 8.7 ft (1.5 x 3.55 x 2.65 m)

• Power Supply Range:           120V, 220V, 50/60Hz

PRICE

Quote at info@eENZYME.com